Appliqué; Creating An Appliqué Border; Programmed Runs; Using Programmed Runs - ELNA XPRESSIVE 2 User Manual

Appliqué
Creating an appliqué
border
Use the Appliqué tool to create an
appliqué border around your appliqué. An
appliqué border is similar to a Steil stitch
border.
You can find Appliqué settings within the
Appliqué segment settings property page.
To create an appliqué border
1 In the Punching toolbar, click the Appliqué
tool.
The pointer becomes a cross hair.
2 Click the Segment Settings
the ribbon.
You see the Segment Settings property
page.
3 Select the Appliqué property page and
make changes to settings.
4 Click OK.
5 Do one of the following to punch the
segment:
To create an open segment, click the
design workspace to place the anchor
points in your design.
To create a closed segment, click the
design workspace to place the anchor
points in your design. Click the Auto
Close tool on the ribbon or press
H on your keyboard to close the
segment.
6 To complete the segment, press ENTER
on your keyboard.

Programmed Runs

Using Programmed Runs

A Programmed Run is a Run segment that
uses a Programmed Fill pattern. Refer to the
Fill online Help located in Help—Fills to view
the Programmed Fill patterns available.
To create Programmed Runs:
1 In the Punching toolbar, click the Run
tool.
The pointer becomes a cross hair.
2 Click the Segment Settings
the ribbon.
You see the Segment Settings dialog
appear.
tool on
3 Click the Run property page.
4 In the Run Style list, select Programmed.
5 In the Programmed Fill Pattern list, select
a Programmed Fill pattern.
6 Click OK.
7 Do one of the following steps to punch a
Programmed Run segment:
To create an open segment, click the
design workspace to place the anchor
points in your design.
To create a closed segment, click the
design workspace to place the anchor
points in your design. Click the Auto
Close
H on your keyboard to close the
segment.
8 To complete the segment, press ENTER
on your keyboard.
Xpressive applies the Programmed Fill
pattern to the Run segment.
ELNA XPRESSIVE II
User's Guide
tool on
tool on the ribbon or press
165