Moving Segments Using The Clipboard - ELNA XPRESSIVE 2 User Manual

Power Edit beads
To move segments using Power Edit:
1 In the Edit toolbar, click the Select
tool or the Lasso Select
2 Select one or more segments.
For more information, see "Selecting
Segments".
The active segment(s) will be enclosed in
a selection box with handles.
3 Click inside of your selection box.
You will now be in Power Edit mode.
You can also press Ctrl+E on your
keyboard and choose Power Edit from
the menu.
To exit Power Edit mode, you can press
on your keyboard, click inside the
ESC
selection box again or select the Select
or Lasso Select tools.
4 Do any of the following steps:
5 Right-click to apply the changes and
tool.
complete the Power Edit.
Moving segments using
the Clipboard
You can cut and paste segments into other
design files.
To move the segment, click and drag it
to the new location.
To stretch the segment, drag the
stretch beads located between the
corner handles.
To rotate the segment, drag the rotate/
mirror bead located outside of the
selection box, extending from the
middle of the selection box.
To mirror the segment, drag the
rotate/mirror bead to the opposite side
of the selection box.
To resize the segment proportionally,
drag the resize beads located at the
corners of the selection box.
To skew the segment, drag the shew
bead located outside of the selection
box, extending from the right side of
the selection box.
ELNA XPRESSIVE II 127
User's Guide