Outputting A Design To The Elna Embroidery Machine - ELNA XPRESSIVE 2 User Manual

thick green lines show you the area that
you can use to adjust your design.
4 To export the design to the SmartMedia
disk use Files—Smart Media—Output.
Outputting a design to the
Elna embroidery machine
You can output designs directly to the Elna
embroidery machine using the Output to
Machine command. The Output to Machine
commands works like a printer where you cue
your designs and the machine signals for
your design when it is ready to sew.
To output a design to the Elna
embroidery machine:
1 Open the design you want to output.
2 Choose File—Output to Machine.
You see the Machine Link dialog.
3 Choose the serial port (COM1, COM2,
and so on) and the machine speed.
The design is then sent to the Elna
embroidery machine .
4 Click Close.
45
ELNA XPRESSIVE II
User's Guide