Changing Pull Compensation Properties; Adjusting Pull-Compensation; Changing Underlay Properties; Selecting The Underlay Type - ELNA XPRESSIVE 2 User Manual

92
Changing Pull
Compensation
properties
Adjusting pull-
compensation
You can adjust the pull-compensation in your
design. You use the settings in the Pull Comp
property page to adjust the pull-
compensation.
None and Percentage pull-compensation
To adjust the pull-compensation:
1 Select the Satin segment.
2 Click the Segment Settings
the ribbon.
You see the Segment Settings property
pages.
3 Click the Pull Comp property page.
4 Select one of the following options:
None. Makes no adjustments to pull-
compensation.
Percentage. Move the Value slider to
specify the amount of pull-
compensation you want your segment
to have and, if necessary, enter the
maximum value of pull-compensation
in the Maximum range box.
In the Segment Settings dialog, look at
the image beside the Value slider. As you
adjust the amount of pull-compensation
for your segment and move the value
slider to the left or right, you can see how
the stitches in your design will be
affected.
5 Click OK.
You see the segment altered accordingly.
Changing Underlay
properties
Selecting the underlay
type
You can select underlay types for various
types of stitches. Choose from Contour and
Perpendicular.
tool on
You can combine underlay types to get
maximum coverage.