ELNA XPRESSIVE 2 User Manual page 125

To resize a segment manually in Power
Edit mode:
1 In the Edit toolbar, click the Select
tool or the Lasso Select
2 Select one or more segments.
For more information, see "Selecting
Segments".
The active segment is enclosed in a
selection box with handles.
3 Click inside of your selection box.
You will now be in Power Edit mode.
To exit Power Edit mode, you can press
on your keyboard, click inside the
ESC
selection box again or select the Select
or Lasso Select tools.
4 Do one or more of the following to resize
segment(s):
To resize segment(s) by width, click
and drag the resize beads located on
the left and right side of the selection
box.
To resize segment(s) by height, click
and drag the resize beads located on
the top and bottom sides of the
selection box.
To resize segment(s) proportionally,
click and drag the resize beads
located at the top or bottom corners of
the selection box.
To resize a segment using the Enter
Resize Parameters dialog:
1 In the Edit toolbar, click the Select
tool.
tool or the Lasso Select
2 Select one or more segments.
For more information, see "Selecting
Segments".
The active segment is enclosed in a
selection box with handles.
3 Click inside of your selection box.
You will now be in Power Edit mode.
4 Right-click any resize bead on the corner
or side of the selection box.
You will see the Enter Resize Parameters
dialog appear.
You can also press Ctrl+E on your
keyboard and select Resize from the
shortcut menu.
ELNA XPRESSIVE II 123
User's Guide
tool.