Remote Mount Installation - Motorola Cleartone CM5000 Installation Manual

INSTALLATION

Remote Mount Installation

Remote Back Cover
Remote Back
Cover PCB
Control Head
Description
Remote Mount Kit CM5000
Remote Mount Cable, 5.5 m, shielded
Assembling the Back Housing for Remote Mount to the Control Head
1. Remove the Control Head from the Transceiver by unscrewing the 4 fixing screws from the
back of the Control Head.
2. Remove the flex from the Control Head only.
3. Connect the flex from the Remote Back Cover PCB to the Control Head.
4. Using screws supplied assemble the Remote Back Cover to the Control Head.
CM5000 TETRA Mobile Repeater/Gateway Installation Manual
Screws
Flex
Remote Mount Cable
Figure 10 Remote Mount Installation with Remote Mount Head
Table 5: Associated Components Remote Mount Kit
Transceiver
Screws
Remote Front Cover
To minimize cosmetic damage disassemble from the bot-
tom side (label side).
Screws
Flex
Remote Front
Cover PCB
Part Number
GMLN4741A
3066579B01
35
Screws