Wireless 802.11 Access Control Page - Motorola SURFboard SVG1202 User Manual

FIELD
DTIM Interval
Fragmentation Threshold
RTS Threshold

Wireless 802.11 Access Control Page

Configure the Access Control to the AP and status on the connected clients.
FIELD
Wireless Interface
MAC Restrict Mode
MAC Address
Connected Clients
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
Sets the wakeup interval for clients in Power Save mode. When a client is
running in Power Save mode, lower SVG1202 bin values provide higher
performance but result in decreased client battery life; higher values
provide lower performance but increased client battery life.
Sets the fragmentation threshold. Packets exceeding this threshold are
fragmented into packets smaller than the threshold before packet
transmission.
Sets the RTS threshold. Packets exceeding this threshold cause the AP to
perform an RTS/CTS exchange to reserve the wireless medium before
packet transmission.
Field Descriptions for the Wireless 802.11 Access Control Page
DESCRIPTION
Shows the MAC address of the installed wireless card. It is not
configurable.
Selects whether wireless clients with the specified MAC address are
allowed or denied wireless access.
Disabled
Select
Lists wireless client MAC addresses allowed or denied wireless access
based on the Restrict Mode setting. Valid input MAC address formats
are XX:XX:XX:XX:XX:XX and XX-XX-XX-XX-XX-XX.
Lists connected wireless clients. As a client connects or leaves the
network, it is added to or removed from the list, Age is the amount of
time since data was transmitted to or received from the client.
to allow all clients.
B
39