Vga Problems - Wacom Cintiq DTK-2100 Installation Manual

VGA PROBLEMS

The display ripples or flickers.
The display is not clear. Text or
other portions of the screen appear
blurred.
The display and LCD panel are not
lined up. The display size is not
correct.
The display ripples or shows a
moiré pattern. The display color is
not even.
• Open the OSD menu and select the A
Then, if necessary, manually adjust pitch and phase.
• Verify that the display adapter or video card matches the
specifications for Cintiq.
• Adjust the refresh rate in the display properties control
panel.
• Set the display resolution of your video card to the
maximum (native) resolution that can be used with
Cintiq. See the "Product specifications" on page 68 for
details.
• Turn off the Cintiq, then turn it back on.
• Open the OSD menu and select the A
If necessary, manually adjust the brightness, pitch, and
phase settings.
• Open the OSD menu and select the A
• As necessary adjust pitch and phase, and horizontal and
vertical position. Note that some video cards may not
show the display in proper sizing.
• Open the OSD menu and select the A
If this does not solve the problem, select the R
option to set the display back to the factory default
settings.
• As necessary, adjust pitch and phase.
A option.
UTO DJUST
A option.
UTO DJUST
A option.
UTO DJUST
A option.
UTO DJUST
ESET
Troubleshooting
Page 49