Placing A Conference Call; Using Meet-Me Conferences - Cisco 7960G - IP Phone VoIP User Manual

Making Conference Calls

Placing a Conference Call

Step 1
Step 2
Step 3

Using Meet-Me Conferences

Cisco IP Phone 7960 and 7940 Series User Guide
3-18
Follow these steps to turn a call into a conference call.
Procedure
During a call, press the more softkey and then the Confrn softkey. Doing so
automatically activates a new line and puts the first party on hold.
Place a call to another number or extension.
When the call connects, press Confrn again to add the new party to the conference
call.
Repeat these steps to add parties to the conference call.
Once the conference call initiator disconnects, no additional parties can be added.
You can drop the last party added by pressing the RmLstC softkey.
Related Topics
Making Conference Calls, page 3-17
•
Using Meet-Me Conferences, page 3-18
•
• Conferencing by Barging in on Established Conversations, page 3-20
Your Cisco IP Phone supports Meet-Me conferences. A Meet-Me conference
allows other callers to dial into the conference call. A Meet-Me conference
requires a special conference number which is pre-configured for this purpose by
your system administrator.
This section covers these topics:
Establishing a Meet-Me Conference, page 3-19
•
• Joining a Meet-Me Conference, page 3-19
Chapter 3 Placing a Call and Other Basic Phone Tasks
78-10182-08