Placing A Conference Call; Call Pickup; Call Pickup Within Your Group; Directed Call Pickup (Specific Group Member) - Cisco 8851 User Manual

CLOUD VOICE S Service – Cisco Unified IP Phone 8851
4.10

Placing a Conference Call

1. During an active call conversation, press the Conference button
2. Enter 8-digits local number / 4-digits extension number of the other invited
3. Press the Conference button again or the Conf softkey.
4. The conference call with 3 parties will begin.
5. Repeat these steps to add more parties, if desired.
Note: If you wish to make a conference with an external party, please remember to
Tips: You can press ConfList to view and press Remove to remove conference
4.11

Call Pickup

When the phone of your pickup group member rings, you can use your own
phone to pick up and answer the call directly.
1. Lift up the handset and press the More (or
2. Press the PickUp softkey to transfer a ringing call within your pickup
3. When your phone rings, press the Answer softkey to pick up and connect
1. Lift up the handset and press the More (or
2. Press the GPickup softkey.
3. Enter the extension number of the phone line with the call that you want
4. When your phone rings, press the Answer softkey to pickup and connect
Version 4.0
party.
add "9" before the 8-digits telephone number
participants.
4.11.1

Call Pickup within your Group

group to your phone.
to the call.
4.11.2

Directed Call Pickup (Specific Group Member)

to pick up.
(For example, if the call is ringing on line extension number '2345', please
enter '2345'.)
to the call.
10
© 2018 WTT HK Limited, All Rights Reserved © WTT HK Limited 2017
.
) softkey
) softkey