Adjusting The Ringer Volume - Cisco 7960G - IP Phone VoIP User Manual

Adjusting the Ringer Volume

Step 2
Adjusting the Ringer Volume
Cisco IP Phone 7960 and 7940 Series User Guide
2-2
Note If you press the Volume button when none of these are in use, you are
adjusting the ringer volume. For details, see the
Volume" section on page
To save this volume setting for future calls, press the Save softkey.
If you adjust the volume during a call without pressing Save, you are changing the
volume level only for the duration of that particular call; on subsequent calls, the
volume level will revert to the previously saved setting.
Related Topics
• Adjusting the Ringer Volume, page 2-2
Personalizing the Ringer Sound, page 2-3
•
Changing the LCD Screen Contrast, page 2-5
•
To change the volume used by the ringer, press the up or down Volume button
while the handset is in its cradle. Continue to press the Volume button to hear
sample rings and to adjust the volume to the desired level. The ringer volume is
automatically saved.
Related Topics
• Adjusting the Handset, Speakerphone, and Headset Volume, page 2-1
Personalizing the Ringer Sound, page 2-3
•
Changing the LCD Screen Contrast, page 2-5
•
Chapter 2
2-2.
Customizing Phone Settings
"Adjusting the Ringer
78-10182-08