Cisco 7941G - Unified IP Phone VoIP Phone Manual page 79

If you want to...
Log out of WebDialer Click the logout icon in the Make Call or Hang Up page.
Set up, view, or
change WebDialer
preferences
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1(3)
Then...
Access the Make Call page.
The Make Call page appears the first time that you use WebDialer (after you
click the number that you want to dial.)
The Make Call page contains the following options:
• Preferred language—Determines the language used for WebDialer
settings and prompts.
• Use preferred device—Identifies the Cisco Unified IP Phone (Calling
device) and directory number (Calling line) that you will use to place
WebDialer calls. If you have one phone with a single line, the appropriate
phone and line are automatically selected. Otherwise, choose a phone
and/or line. If you have more than one phone, it will be specified by
device type and MAC address. (To display the MAC address on your
phone, choose
Note If you have an Extension Mobility profile, you can select your
Extension Mobility logged-in device from the Calling device menu.
• Do not display call confirmation—If selected, prompts WebDialer to
suppress the Make Call page. This page appears by default after you click
a phone number in a WebDialer-enabled online directory.
Using the Cisco Unified CM User Options Web Pages
> Network Configuration > MAC Address.)
79