Ending A Call - Cisco 7941G - Unified IP Phone VoIP Phone Manual

If you want to...
Answer a priority call (SCCP
phones only)
Answer a call on your cellular
phone or other remote
destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using the headset
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1(3)
Then...
Hang up the current call and press
Answer.
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a
missed call message.
• When you answer the call on one
remote destination, the other
remote destinations stop ringing,
are disconnected, and a missed
call message is shown on the other
remote destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press . Or, to keep headset mode active, press EndCall.
or EndCall.
Press EndCall. If necessary, remove the call from hold first.
Basic Call Handling
For more information, see...
Prioritizing Critical Calls,
page 51
Managing Business Calls
Using a Single Phone
Number, page 53
29