Using Conference - Cisco 7941G - Unified IP Phone VoIP Phone Manual

Using Conference

Conference allows you to call each participant. Conference is available on most phones.
If you want to...
Create a conference
Add new participants to an
existing conference
See a list of participants or
remove participants
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1(3)
Then...
1. From a connected call, press Confrn or Conference. (You may
need to press the more softkey to see Confrn.)
2. Enter the participant's phone number.
3. Wait for the call to connect.
4. Press Confrn or Conference again to add the participant to your
call.
5. Repeat to add additional participants.
Repeat the steps listed above.
Your system administrator determines whether non-initiators of a
conference can add or remove participants.
See Viewing or Removing Conference Participants, page
Basic Call Handling
40.
37