Cisco 7941G - Unified IP Phone VoIP Phone Manual page 17

Item
Programmable
1
buttons
Phone screen
2
Footstand button
3
Messages button
4
Directories button
5
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1(3)
Description
Depending on configuration,
programmable buttons provide access to:
• Phone lines (line buttons) and intercom
lines
• Speed-dial numbers (speed-dial
buttons, including the BLF speed-dial
feature)
• Web-based services (for example, a
Personal Address Book button)
• Call features (for example, a Privacy,
Hold, or Transfer button)
Buttons illuminate to indicate status:
Green, steady—Active call or
two-way intercom call
Green, flashing—Held call
Amber, steady—Privacy in use,
one-way intercom call, DND
active, or logged into Hunt
Groups
Amber, flashing—Incoming call
or reverting call
Red, steady—Remote line in use
(shared line, BLF status or active
Mobile Connect call)
Red, flashing—Remote call on
hold
Shows call features.
Allows you to adjust the angle of the phone
base.
Auto-dials your voice message service
(varies by service).
Opens/closes the Directories menu. Use it to
access call logs and directories.
An Overview of Your Phone
For more information, see...
Understanding Lines and
•
Calls, page 18
Basic Call Handling,
•
page 24
Speed Dialing, page 42
•
Using a Shared Line,
•
page 45
• Using BLF to Determine a
Line State, page 49
Placing or Receiving
•
Intercom Calls, page 40
Understanding Lines and
Calls, page 18
Adjusting the Footstand
(Optional), page 13
Accessing Voice Messages,
page 65
Using Call Logs, page 57
17