Specifying The Output Destination Of Audio And Midi Signals; Setup For Audio Playback And Recording - Yamaha UW500 Owner's Manual

Installing the Driver

Specifying the output destination of audio and MIDI signals

This section explains how to set up Windows 98 to use the UW500. For information
on setting up your sequence software, refer to the owner's manual for the software.

Setup for audio playback and recording

1. Double-click "Multimedia" in the "Control Panel" to open the Multime-
dia Properties window.
2. Click the "Audio" tab.
3. Click the "Preferred device" box in "Playback" and select "USB Audio
Device."
NOTE
4. Click the "Preferred device" box in "Recording" and select "USB Audio
Device."
5. Check the "Use only preferred devices" checkbox and click [OK].
28
"USB Audio Device (1)" may appear, depending on the computer. If two or
more USB audio devices are connected, the corresponding number
appears in parentheses.