Connecting An Electric Guitar Or Microphone; Connecting Headphones - Yamaha UW500 Owner's Manual

(4) Connecting an electric guitar or microphone

Connect an electric guitar, guitar effect, or microphone to INPUT 1 or 2. Set the gain
switch for INPUT 1 or 2 to "GUITAR" or "MIC" and set the INPUT SELECT switch to
"MONO."
Use caution when you set the gain switch. An inappropriate setting may
damage your hearing or other audio devices.
Be sure to lower the INPUT 1 or 2 knob setting to minimum before connect-
ing a cable to the INPUT 1 or 2 jack.
NOTE Refer to page 34 for more information on the digital audio recording of gui-
tar or other instruments.
microphone

(5) Connecting headphones

Connect a standard stereo plug of your headphones to the PHONES jack of the
UW500. Use the OUTPUT knob to adjust the headphone volume.
Set the INPUT SELECT switch
on the rear panel to "MONO."
"GUITAR" for guitar connecion
"MIC" for microphone connection
guitar
Connection
19