Playing The Demo Song - Yamaha UW500 Owner's Manual

Playing the Demo Song

This section explains how to play the demo song using the UW500, included sequence
software "XGworks" and SoftSynthesizer "S-YXG50."
NOTE
"Unreal Wave"
Composed, Arranged & Programmed by Katsunori Ujiie (Idecs, Inc.)
E.Guitar: Isamu Tessy Teshima / E.Bass: Naoyuki Taro Irie / Vocal & Lyrics: ANTHONY F. SHOEMO
1. Connect the headphones to the PHONES jack (page 12) and powered
speakers to the OUTPUT jacks (page 14).
Before connecting, be sure to lower the OUTPUT knob to minimum.
2. Turn the OUTPUT knob to the ON position to turn on the power to the
UW500.
Set the OUTPUT knob to the minimum position (just above the ON label).
3. Start XGworks.
From the [Start] menu, select [Programs]
[XGworks].
4. From the [Setup] menu, select [System Setup] to display the Device
page of the system setup dialog.
5. Click the [MIDI OUT 1] box to display the pop-up menu and select an
appropriate device.
Select "YAMAHA SXG Driver" to use SoftSynthesizer. Select "YAMAHA USB OUT
0-1" to use an external MIDI sound source connected to the MIDI IN terminal.
Select "YAMAHA USB OUT 0-2" to use an external MIDI sound source connected
to the TO TG terminal.
32
For more information on using XGworks, refer to the included PDF manual.
[YAMAHA XGworks lite Ver. 3.0]