Yamaha UW500 Owner's Manual page 43

9. Insert the Wave data for the vocal part ("RAP.wav") into the second mea-
sure on Track 19 (as in step 7). Double-click the inserted Wave block, then
set the location of the Wave file as follows: L1=0002, L2=02, L3=290.
10. Click the Play button in the Play Control panel to start playing back the
song. To stop the playback, click the Stop button.
11. In the manner described above, you can select any other Wave files to cre-
ate an original song.
Other Wave files are located in the "Additional Wave" folder contained in the
"Demo" folder of the CD-ROM.
12. When your original song is complete, from the [File] menu select [Save As]
to store the song file.
NOTE If you want to save the Wave data itself in the song file, save it using the
"XGworks Original File with Wave (*.XWS)" format.
Creating a Song Using Sample Phrases
43