Cannot Suspend Or Resume The Computer Correctly; Wish To Use The Uw500 In Midi-Supported Games - Yamaha UW500 Owner's Manual

[Control Panel]
NOTE
Make sure that the file system is correctly set. If the computer has enough free
memory space (more than 128MB) and the size of the Wave file to be recorded
or played back is not large, you may be able to improve the performance by
changing the setting for the virtual memory.
Some computers may need updated device drivers (such as a hard disk control-
ler) or BIOS. For more information, contact the customer support department or
visit the home page of the computer manufacturer.

Cannot suspend or resume the computer correctly.

• Do not suspend the computer while the audio/MIDI application is running.

Wish to use the UW500 in MIDI-supported games.

1. Double-click "Multimedia" in the "Control Panel".
2. Click the "MIDI" tab and select the driver according to the port number of
the connected tone generator. (page 29)
Wave data and MIDI data do not synchronize with each other
on XGworks.
MIDI data may not synchronize to Wave data on some computers. In this case,
insert blank Wave data at the end of the XGworks song.
Select [System Setup] from the [Setup] menu in XGworks to display the Device
page. Do not select unnecessary devices here.
[System] [Performance].
Yamaha recommends that only users with advanced knowledge
about computers change this setting.
Troubleshooting (FAQ)
53