Mastering To An Md; Connect An Md Recorder To The Uw500’S Digital Out Jack - Yamaha UW500 Owner's Manual

Hard Disk Recording
11. Click the Stop button in the Play Control panel to stop recording.
NOTE

Mastering to an MD

XGworks
Synthesizer
1. Connect an MD recorder to the UW500's DIGITAL OUT jack.
Before making connections, be sure to turn off the power to the UW500.
NOTE
2. Turn the OUTPUT knob to the ON position to turn on the power to the
UW500.
Set the OUTPUT knob to the minimum position (just above the ON label).
3. Start recording on the MD recorder, then click the Play button in the Play
Control panel of XGworks to start playing back the song.
4. When the song ends, stop the MD recorder.
38
To redo recording, click the undo button on the Tool bar to cancel the
recording.
computer
Soft
USB
terminal
Analog signals input at INPUT 1-3 or AUX IN cannot be route to the DIGI-
TAL OUT jack. Therefore, if you wish to record the sound of an external
MIDI tone generator, first you need to record the sound, as well as the gui-
tar sound, to the hard disk.
UW500
DIGITAL OUT jack
MD recorder
headphone