6.6 Color management on the DocuColor 4 LP/CP
6.6.3
CMYK Simulation
If you are using the DocuColor 4 LP/CP to print proofs for an offset press job
or to simulate another print device, choose the appropriate CMYK Simula-
tion setting. The CMYK Simulation setting specifies the offset press stan-
dard or other color gamut that you want to simulate.
The CMYK Simulation setting you should specify depends on the press stan-
dard for which the CMYK data was separated. For example, for images that
were separated for SWOP-Coated paper, choose SWOP-Coated as the CMYK
Simulation setting. Select SWOP-Coated to simulate printing to a standard
American offset press, Euroscale to simulate a European offset press, or DIC
to simulate a standard Japanese offset press. For images that were separated
using a custom separation (such as a device-specific separation or a separa-
tion produced with an ICC-profile), choose None as the CMYK Simulation
setting.
6
108