Basic Operation Workflow - Xerox DocuColor DocuColor 4 User Manual

7.1

Basic Operation Workflow

This section explains the basic workflow in the copy operation.
1. Switching to the copy mode
Press the [Copy] button.
If the pass code has been set, enter the pass code.
If the pass code has been set, see the "7.2 Switching to the copy mode (when
pass code is input)" section for detailed information on how to enter the
pass code.
Copy mode
7
2. Copying
Positioning an original.
For detailed information on how to position an original, see "Chapter 8 Po-
sitioning an Original."
110