Working With White Balance Presets; Importing Camera Images; Import Scenarios - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

Temperature
: use this slider to adjust the color tint of the image.
Tint
White Bal . pop-up menu: this menu includes several white-balance pre-sets.
When you select a value here, the
as specified by your selected preset. See also the discussion below.

Working with White Balance Presets

Use the pop-up menu to load preset values for the
White Bal.
controls. There are several types of entries in this menu:
and
Create Delete
When you select
then stored as a user preset with the current temperature and tint settings. If
you no longer need one of your user presets, first activate it using the menu,
then select
Delete Preset
As Shot : all new shots have some type of setting for temperature and tint.
Select this entry to return these settings to the values they had when the shot
was originally taken.
: select this entry to set the temperature and tint based on an analysis of
Auto
the current photo. The resulting values will be slightly different for each
picture. This function works best with photos that contain a full range of tints
without a heavy intentional cast.
Factory presets: below the
match typical lighting situations. These match the selections offered by Ixpress
camera backs when shooting in the field. You cannot delete these.
User presets: if you have saved any of your own presets, then these are listed
in a division under the factory presets. You can freely add or remove entries
here using the
: this entry becomes active whenever you adjust the
Custom
and/or Tint sliders manually. If you choose this entry from the menu, it
becomes the active selection, but the temperature and tint value initially
remain unchanged.

Importing Camera Images

Import Scenarios

The procedure for importing images taken with an Ixpress camera varies according to
which solution you are using. The following rules apply:
When shooting away from your computer, newer cameras (including the
Hasselblad H2D camera and Ixpress CF and CFH camera backs) save images
locally using the DNG format, which is a raw camera format developed by
Adobe.
FlexColor 4.5 Documentation Addendum
: use this slider to set the color temperature of your lights.
Temperate
entries: use these to manage your own set of user presets.
Create Preset , you are asked to enter a name, which will
here.
entry is a set of several presets named to
Auto
Create Preset and Delete Preset
Part 2: FlexColor for Cameras
Importing Camera Images
and values will be adjusted
Tint
Temperature
entries of this menu.
Temperature
and
Tint
22