Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual page 107

The Setup Window
34
General Tab
Resolution PPI
Defines the resolution of the output image. Set this value according to the
requirements for your printed output. Most high-quality color work uses
300 ppi. Newspapers typically use less (150 to 200 ppi). On-screen display,
such as for the web, requires only 72 ppi. See "Size Controls" on page 24
for more information about PPI and image sizing.
Zoom
The level of magnification applied when the image is saved. See "Size
Controls" on page 24 for more information about zooming and image
sizing.
ISO
Enables you to select between sensitivities of ISO 50 or 100. If you are
using an Ixpress camera back, you will be able to select between ISO 200
and 400 as well.
This setting will also be reflected in the Exposure Window (see page 79).
Mirror
If your original is a mirror image, or if you want to create a mirrored
image from the original, then place a check in this box. To keep the image
as captured, make sure this box is not checked.
Enhanced shadow detail
Activates an algorithm that delivers more details in the shadow areas.
This function is active by default and should only be deselected for images
with a very narrow dynamic range or for images with an unusually high
amount of color information in dark areas.
Software Reference - FlexColor 4.0 for Camera Backs