The Setup Window
36
Texture Tab
Texture Tab
The settings in the Texture tab reflect those made in the Texture window
(available from the Window menu).
For more information about unsharp masking, see "The Texture Window"
on page 101.
Color %
These three fields (Red, Green, and Blue) control the amount of
sharpening effect applied in each color channel. Normally, you should
leave them set to 100 each, which applies sharpening equally to all
channels. In some cases, you may be able to reduce the effect of noise by
applying less sharpening to one channel (typically the blue channel). You
can also use these settings to create special effects.
Apply
Mark this check box to apply the unsharp mask filter to all images.
Remove the check to disable the filter.
Software Reference - FlexColor 4.0 for Camera Backs