File Names And Locations; Auto Tiff Export; Choosing Setups - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

To open the window, click on the
the main FlexColor window.

File Names and Locations

Use the settings at the top of the
be stored and how they will be named.
Use the
3F File Destination
your 3F files.
If you would like to create a new sub-folder each time you use the Scan 3F
window, mark the
new 3F batch scan, FlexColor will create a new sub-folder below the
Destination folder and save the new scans there. Either way, the contents of
the most recently used folder will be displayed in the FlexColor
window immediately after the batch is finished. This function is most useful
when you are using a batch feeder to scan many images at once.
Use the Image Name
will be given a name based on this value plus a unique number, which ensures
that each image will have a unique file name when you are scanning a batch.

Auto TIFF Export

If you like, you can automatically export TIFF versions of your scans as you make
them. Each scan will then produce both a 3F file for your archive, plus a TIFF file in
which the default setup (plus optional auto-crop and/or auto-level settings) have been
permanently applied. The TIFF files will be saved in a sub-folder automatically
created below the destination or job folder established above.
To enable this auto-export feature, mark the

Choosing Setups

Use the pop-up menus in the middle of the
the scan. These settings will control the initial appearance of your 3F files, but you
can change these later before exporting. The following controls are provided:
: select the type of original you are scanning (auto, positive,
Film Type
negative or black & white negative). When you use the auto function, the
scanner will analyze the image and then decide if it is a color positive or color
negative; it will then use the setup you have selected from the
or
Negative Setup
detect black & white negatives (it will probably apply the positive setup if you
try it), so you should scan these separately. The selection you make here will
affect the selection of setups available in the
: this setting is only available when you set the
Setup
other than "Auto". Use it to select the setup that you wish to apply to your 3F
FlexColor 4.5 Documentation Addendum
3F button in the tool panel on the left side of
window to control where your 3F files will
Scan 3F
setting to select a parent folder in which to save
Add job folder check box. Then, each time you begin a
field to specify a name for your image(s). Each image
Save final TIFF's
Scan 3F
pop-up menus, as appropriate. The auto function cannot
Part 3: FlexColor for Scanners
Scanning with 3F
Thumbnails
check box.
window to establish the setup for
Positive Setup
Scan 3F window.
to something
Film Type
30