Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual page 173

Selective Color Correction
100
Using the Color Correction Window
4.
5.
6.
7.
The functionalities of the Active and Reload buttons are described in
details on page 85.
You can also view and edit settings made in the Color Correction window
by looking at the CC tab in the Setup window. The color correction
settings are saved and loaded together with all of the other settings in the
Setup window, so you can keep a library of your favorite settings by
saving a new Setup file for each one. See "Managing Setups" on page 30
for more information.
NOTE! If you are using the Gradations window to lighten the image, then
you may notice that the saturation decreases. To compensate, you may
then increase the saturation in the Color Correction window, which will
make the image look a bit darker again. Avoid entering a cycle in which
you repeat each of these settings until both windows are set to extremes.
Extreme settings will typically degrade your image.
The pop-up menu near the top of the window displays the nearest
primary color to the one you picked in the preview. Adjusting this
color will have the most dramatic effect on the color you chose.
However, if you wish to edit a different primary color, then select a
different color from the pop-up menu.
Add or subtract any of the other colors using the arrow buttons and
numerical entry fields provided for each color channel. Positive
values will add the respective color, negative values will remove it.
All pixels containing the color selected in pop-up menu will be
adjusted proportionately.
If you would like to change the saturation throughout the image, then
use the Saturation slider. The hues will remain the same, but all of the
colors will become either more or less strong, depending on whether
you choose a positive or negative setting, respectively.
The lower square updates to show the effects your changes will have
on the color you selected in the preview. Continue to adjust the
settings until you are satisfied with the color shown in this box.
Software Reference - FlexColor 4.0 for Camera Backs