Using The Detail Window; Introduction; Opening The Detail Window; Loading And Working With Images - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

Using the Detail Window

In FlexColor 4.5, the
extended functionality. The description below fully replaces the section from the
FlexColor 4.0 User's Guide.

Introduction

The Detail window can show up to 4 detail views of the preview image (in 100 to
400%).
The detail views are especially useful when you want to see the effect of the
corrections performed using the various correction tools in different areas of your
preview image. It also gives you a zoomed view with which to use the various color
pickers for highlight, shadow, white balance, etc.

Opening the Detail Window

There are many ways to open the
Type cmd-5
Type the letter "d"
Click on the Detail
Select
Detail
When you first open the
with a black border to indicate that that pane is active. While the pane is active, try to
move your mouse cursor over the preview window; the cursor is now replaced with a
box that indicates the area of the
drag on the bottom-right corner of the
your cursor in the preview updates to match the new size.

Loading and Working with Images

To load an image into the
and then click on the part of the preview image that you want to load. The cursor
remains active, so you can continue to click here and there in the preview to inspect
various parts of your image.
FlexColor 4.5 Documentation Addendum
Detail window has been improved to support larger images and
window:
Detail
button in the Zoom
from the menu.
Window
window, it contains a single pane, which is shown
Detail
window pane. To resize the pane, click and
Detail
Detail
window, first set the window to the size you want,
Detail
Part 1: For All FlexColor Users
Using the Detail Window
area of the main FlexColor window
window—note that the size of the box at
11