Using The Detail Window - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

The Detail Window
106

Using the Detail Window

Using the Detail Window
Use the "-" and "+" buttons to add or delete a detail view (views are
deleted from right to left) and select zoom level using the Zoom In and
Zoom Out buttons.
To create a detail view, click inside the view frame to activate it, then
move the cursor over the preview image - note that while you move the
cursor over the preview image, the detail view will show a low-resolution
view of the area around the cursor. Once you have located the spot in the
preview image from where you want the detail, click it once and the detail
image will be created in your currently selected detail view.
To make comparison between different settings, you can lock individual
views by clicking the Detail View Lock icon which will prevent the view
from being updated when settings are changed.
To use the left view as a magnification view click the Magnification
button below the view. The magnified image shown is the area
surrounding the mouse pointer. The selected pixel is the one directly
under the cross-cursor in the center of the magnification view.
To open the Detail window, type cmd-5 or click on the
Detail button in the Zoom area of the main FlexColor
window or select Detail from the Window menu.
Delete detail view
Add detail view
Zoom Out
Zoom In
Magnification or detail view
Magnification button
Detail view
Detail view lock
Software Reference - FlexColor 4.0 for Camera Backs
Currently
selected
detail view