Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual page 56

1


1


MAIN MENU > SETTINGS > About
The About box
Occasionally, Hasselblad releases updates to the internal software
("firmware") of the digital back. These updates may fix small er-
rors and/or add new features. You will probably receive additional
assistance from Hasselblad technical support if and when a new
update is available. In this case, it may be important to know the
serial number and current firmware vision of your digital back.
To find this out:
1. Select MAIN MENU > SETTINGS > ABOUT. (See also
Navigating the Menu System or details about how to find
this setting.)
2. Press  to open the About dialog, which shows the serial
number and firmware version. When you are done reading
the information, press the menu (EXIT) button to return to the
SETTINGS menu. Either move on to another setting by using
the navigator button or press the menu (EXIT) button again
to exit the menu system.
MAIN MENU > SETTINGS > Default
The DEFAULT setting will reset all custom settings you have made
back to the original default / factory settings.
To reset all settings:
1. Select the MAIN MENU > SETTINGS > DEFAULT entry.
2. Press the OK button and then the EXIT to return.
56