Part 3: Flexcolor For Scanners; Scanning With 3F; Opening The Scan 3F Window - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

Part 3: FlexColor for Scanners

Scanning with 3F

Part 3:
FlexColor for Scanners
This part provides information about how FlexColor works when connected to a
scanner and/or when working with scanned images. If you never use FlexColor with a
scanner or scanned images, then you can ignore this part.
Scanning with 3F
The procedure for scanning images to 3F files is approximately the same in FlexColor
4.5 as it was in FlexColor 4.0. However, the feature has been revised and expanded
somewhat. See the FlexColor 4.0 User's Guide for a general discussion about using
3F, but refer to the sub-sections below for details about the various settings available
in the new window.
Scan 3F

Opening the Scan 3F Window

To scan to 3F, you must use the window, which is only available when you
Scan 3F
have a scanner connected to your computer.
FlexColor 4.5 Documentation Addendum 29