Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual page 117

The Setup Window
44
ColorSync or ICM Tab
Input (PC)
Functionality is basically the same as for Mac except that clicking the
Change button will open the Scanners and Cameras control panel which
shows the list of connected devices.
Here you can select properties for your device(s) which will bring up a
dialog box from where (e.g. Color Management tab) you can change the
color management e.g. the list of attached profile(s).
Please note that FlexColor will always choose the first profile found in the
list if more than one are present.
RGB
This pop-up menu lists all of the RGB profiles currently installed on your
system. Choose a profile that represents the color space in which you
work. (If you are using Adobe Photoshop, you can choose the space used
by Photoshop). To see which space is used by Photoshop, start Photoshop
and choose Edit -> Color Settings. The Color Settings window appears
(see the Getting Started... manual for more information about using this
window). In this example the RGB working space is the ICC profile Adobe
RGB (1998).
If you choose an RGB color space (ex. Adobe RGB 1998) you should check
both the Convert and Embed Profile fields on the ColorSync or ICM Tab.
When selecting the default output profile for RGB, FlexColor will use the
output profile as specified on the Output Profiles tab in the Preferences
window - see page 51 for details.
Software Reference - FlexColor 4.0 for Camera Backs