White Balance; Set Wb By Touch - Hasselblad CFV II 50C User Manual

WH ITE BAL AN C E
The white balance (WB) setting controls the color rendering of
the images shown on the display and the JPG files. For RAW
files, WB can always be changed in the computer.
White Balance can be set from the control screen.
If the screen is not active press any of the rear buttons to
activate.
If the control screen is not already visible you can slide the
finger from the top to the bottom to reveal it (A). This can be
done from any screen.
Alternatively press the menu button (C) until you see the
control screen (B).
You can set WB either by using touch or by using the buttons.

Set WB by touch:

Tap the WB icon (D) to show the setting list (E). Select the new
WB setting by tapping (F). The list will disappear and the new
value will be selected (G).
Setting of manual white balance is explained on page 44.
Temp [ºK]
AWB 2000-10000
Cloudy 6500
Shade 7500
Daylight
5500
Tungsten
2850
Fluorescent
3800
Flash 5500
Manual Variable
CFV II 50C USER GUIDE
Tint
-150 to 150
10
10
10
0
21
0
0
A
CONTENTS
D
C
F
USING THE CFV
42
B
E
G
www.hasselblad.com