1
3
5
7
9
2
4
6
8
10
Initial delay: Controls the amount of time required to elapse
before the first exposure.
Delay: Controls the amount of time required between each ex-
posure.
Count: Controls the total number of exposures required.
Setting EXPOSURE TIME and CAPTURE SEQUENCE
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use and to select the SETTINGS sub-menu.
3. Press to open the SETTINGS menu.
4. Use and to select CAMERA.
5. Press to open the CAMERA menu.
6. Press either the
or
7. Press or to select EXPOSURE TIME.
8. Press either
or
to make an exposure time setting.
9. Press to select CAPTURE SEQUENCE.
10. Press to open the CAPTURE SEQUENCE menu.
54
button to select PINHOLE.