Format; Copy - Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual

3

4
3

4
5
3. Press the  button to reach the confirmation dialogue.
To confirm, press the OK button. (To cancel, press the EXIT
button.)
Confirmation will make a copy of all batches and files and
store them on the ImageBank-II in a newly created folder
called 'CARD0001' (for example). If you connect the camera to
the ImageBank-ll again, a new folder is automatically created
with the name 'CARD0002' (for example) and so on.
4. The copy dialogue now appears to inform you of progress.
Press STOP if you want to cancel the procedure.
BATCH
Batches help you to organize your work. They are very similar to
folders on a computer hard disk. Use the Batch command of the
STORAGE menu each time you want to create a new batch.
For more information about batches, please see Working with
Media and Batches.
To create a new batch:
1. Press the MENU button.
2. Press  to navigate down and select the Storage dialog.
Press  and then  to navigate down and select Batch.
3 Press  to open the Batch dialog. The new batch name will
always begin with a three-digit number, which automatically
increments by one with each new batch. Following this is five
letters, which you can assign yourself to help make the batch
easier to identify. To set the letters:
• Use  and  to select one of the five letters.
• Use the or button to step the currently selected letter up
or down the alphabet until you have found the letter you
want.
• Continue working until you have set the name you want.
4. Press the approve (OK) button to save the new batch with the
name you selected.
5. You now return to the BATCH menu. Either move on to
another setting by using the navigator button or press the
menu (EXIT) button to exit the menu system.

Remember that all new images are stored automatically in
the latest batch. It is not possible to store new images in older
batches.
43