Func Tion Selec Tor; Film Plane Index; Dark Slide Key; Film Tab Holder - Hasselblad H3D 31MPix User Manual

Table of Contents

Advertisement

E
G
I
K
F
H
J
L
The HM 16-32 Film Magazine is an optional accessory.
Function selector
Selects the four functions that can be changed on the magazine.
The functions are on a menu loop so that repeated pressing of the
selector button will successively access all functions in turn. After
a time-out of five seconds of non-activity, the display returns to
the main screen.
Changes can only be made when the settings lock switch is in
the unlocked position.

Film plane index

Provides a measuring point for the actual position of the film plane
in the magazine. Used for calculations in critical applications.
Darkslide key
Withdraws and replaces the darkslide. Fold out the key and turn it
counter-clockwise 360° (towards the open
and clockwise 360° (towards the closed
The darkslide can only be withdrawn when the magazine is
attached to the camera.
Darkslide indicator
Indicates whether the darkslide is in place or withdrawn:
RED
= stop ! = exposure CANNOT be made
(magazine can be removed from camera)
WHITE = ok !
= exposure CAN be made
(magazine cannot be removed from camera)
If you attempt to make an exposure when the darkslide is closed,
however, you will receive a warning message in the viewfinder
and grip LCDs – 'The darkslide is closed'.

Film tab holder

Holds an ID tab from the film roll pack as a reminder of the type
of film loaded. Don't forget to change it if you change film type!
Film holder key
Secures the film holder in the magazine. Fold out the key and
turn counter-clockwise 90° to remove the film holder and turn
clockwise 90˚ to lock the film holder in place.
Magazine settings lock
All settings can be locked to avoid inadvertent changes. To change
the settings, slide the settings lock (see illus) to the right until it
stops. After the changes have been made, slide the settings lock
to the left (see symbol on magazine) again to secure the new set-
tings.
Databus interface
Data interface between magazine and camera. Ensure the contacts
are kept clean and protected from damage. Keep the protective
cover on when the magazine is being stored or transported.
117
E
F
G
symbol) to withdraw it
symbol) to replace it.
H
I
J
K
L

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3d 22mpixH3d 39mpix

Table of Contents