Advertisement
2.
Open the STM32CubeProgrammer tool, and then establish the communication as described in
Chapter 5.2.
Select the "UART" port, and click "Connect" until there is "Data read successfully".
3.
Choose the firmware package from "Open file".
4.
Click "Download" and the firmware upgrade's progress is shown by the progress bar at the bottom of
5.
the page. The message "File download complete" indicates that the firmware upgrade is complete.
KG200Z_TE-B_User_Guide
Figure 23: Firmware Download in Bootloader Mode
Short-Range Module Series
30 / 34
Advertisement
Need help?
Do you have a question about the Short-Range Module Series and is the answer not in the manual?