Setting The User Parameters For The Lan Interface - Panasonic UF-4500 Operating Instructions Manual

8
Enter the subnet mask using the keypad. Press
the period ".".
Ex:
1 2
9
10
Enter the default gateway using the keypad. Press
enter the period ".".
Ex:
1 2
11
To continue setting other parameters, or press
to return to standby.
If you change the setting of this parameter, the machine
will reboot automatically.

Setting the User Parameters for the LAN Interface

Depending on how your machine will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first.
Parameter
IP ADDRESS IP Address assigned to your machine by the Network Administrator or the DHCP Server.
SUBNET MASK Subnet Mask assigned by the Network Administrator or the DHCP Server.
DEFAULT GATEWAY Default Gateway IP Address assigned by the Network Administrator or the DHCP
IP ADDR Server.
REMOTE PASSWORD This is a security password that allows Remote Programming of the Internet Parameters
and Auto Dialer or the retrieval of the Journal via an Email. (Up to 10 characters)
LAN PC-FAX A password that provides Network security for your Relay Station (used exclusively for
PASSWORD G3 relay purposes).(Up to 10 characters)
COMMUNITY NAME Community Name used for the Network Device Locator.
(01) ~ (02)
DEVICE NAME Device Name used for the Network Device Locator.
DEVICE LOCATION Device Location for the Network Device Locator.
Setting the Network Parameters
3 1 7 8 2
3 1 7 8 2
SUBNET MASK
to enter
123.178.240.4
0
4 4
DEF. GATEWAY IP
DEF. GATEWAY IP
to
123.178.240.5
0
4 5
Sto p
Comments
139