Changing Or Erasing The Multiple Logo - Panasonic UF-4500 Operating Instructions Manual

Changing or Erasing the Multiple LOGO

If you have to change or erase any of the Multiple LOGOs, follow the steps below.
1
7
2
4
3
Enter the Key Operator Password (The factory default
password is 00000000.) and press
4
7 7
5
6
Enter the LOGO number you wish to change or erase.
Ex:
1 2
7
then enter a new LOGO (See Note 1 and 2).
Ex:
P A N A F A X
S A L E S
or just go to step 8 to erase the LOGO.
8
To return to standby, press
NOTE
1. If you make a mistake, use
Clear
2. Use
department name following the default LOGO.
(01 to 24)
Abbr Dial/Space
.
Sto p
then re-enter the correct LOGO.
to copy the default LOGO which is set in the User Parameters. You can add the
Copy
.
Set
to move the cursor beyond the incorrect character, press
Multiple LOGO
SET MODE (1-8)
ENTER NO. OR ∨∧
KEY OPERATOR ID
ENTER ID=
FAX PARAMETERS
NO.= (01-169)
LOGO/DEPT. CODE?
MULTI LOGO<>
MULTI-LOGO
ENTER NO. OR ∨∧
LOGO/DEPT. NAME
12 ANASONIC SAL
LOGO/DEPT. NAME
12
LOGO/DEPT. NAME
12 ANAFAX SALES
LOGO/DEPT. NAME
13
119