Direct Transmission - Panasonic UF-4500 Operating Instructions Manual

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
Without storing image into memory, follow the steps below.
1
2
3
1
4
Enter the telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
5
Your machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first and then press
NOTE
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. To stop the transmission, press
The display shows:
COMM. STOP?
1:YES 2:NO
Press
the printout mode setting of the Communication Journal.
Set document(s) face up.
8 9
to enter a pause (represented by a "-") before dialing the full number.
Redial/Pause
(represented by a"/"). The dialing method will be changed from Pulse to Tone after
to stop the transmission. The Communication Journal will not print out regardless of
1
Sending Documents
ENTER STATION(S)
THEN PRESS START
MEMORY XMT?
ENTER STATION
PRESS START
5551234
* DIALING *
5551234
.
Sto p
ON<>
57