Panasonic UF-4500 Operating Instructions Manual page 41

No. Parameter
77 LOGO/DEPT. CODE
82 QUICK MEM. XMT
91 SET ENTERED STN
99 MEMORY SIZE
(Flash Memory)
101 MULTI PRINT
102 LCD CONTRAST
117 MULTI STATION
125 CONFIRM STNS
Setting
Setting
Number
1 INVALID Selecting whether the machine performs the Multiple Logo
or Department Code operation. (See page 110 and 118)
2 MULTI-
LOGO
3 DEPT.
CODE
1 INVALID Selecting whether the machine performs Quick Memory
Transmission. (See pages 50 to 52)
2 VALID
INVALID: Stores all documents into memory first before
VALID : Starts dialing the telephone number immediately
The Quick Memory Transmission feature is not available
when the Job Build (Fax Parameter No. 133) is set to
"2:ON".
1 INVALID Selecting whether to press the SET key when entering
station(s) with One-Touch Dialing or Abbreviated Dialing or
2 VALID
entering a telephone number with keypad.
- - Displays the memory size.
1 OFF When the machine receive the faxes with MULTI PRINT
set "ON", the machine will print the received faxes by the
2 ON
number of copies which you set beforehand.
1 NORMAL Setting the LCD contrast on the control panel.
2 DARKER
1 INVALID Set the default setting for the Multi Station function.
INVALID: The document is sent to a single destination
2 VALID
VALID : Allows sending the document to multiple
1 INVALID Set whether to confirm the destinations.
When set to Valid the document cannot be sent unless the
2 VALID
destination is confirmed.
This function also operates when the addresses are
specified with Group Dialing or Program Dialing function.
If an address has been altered (added or removed) when
confirming addresses, the address confirmation message
will appears again when transmitting the documents
(pressing the start key).
Customizing Your Machine
Comments
dialing the telephone number.
after storing the first page.
only.
destinations.
Continued on the next page...
41