Panasonic UF-4500 Operating Instructions Manual page 168

Troubleshooting
Troubleshooting
Mode
TAM Interface Trouble
in Unattended TAM I/F
Mode (OUT Mode)
168
Symptom
Cannot utilize the This feature is not compatible. The fax machine is designed to
remote turn-on feature answer after 8 rings if the TAM does not answer.
of the telephone
answering machine
(TAM). The fax
machine always
answers after the 8th
ring.
Fax machine will not TAM that gives outgoing announcement only is not
start up when the compatible. The fax machine will work with a TAM that will
telephone answering record Incoming message (ICM).
machine is set to give
only an outgoing
message (OGM).
A beep...beep sound is Speak a little slower between each word while recording an
recorded on the outgoing message (OGM).
telephone answering
machine.
Fax machine starts up Make sure the outgoing message (OGM) does not have a
in the middle of the silent pause longer than 5 seconds.
outgoing message
even though the caller
wants to leave a voice
message.
Cannot receive from a
Instruct the calling party to press
machine that does not
phone during the OGM to start up your fax machine remotely.
send CNG signal (a
short beep tone every
3 seconds) after
dialing.
Cannot receive a fax Check your outgoing message, if it is too long, the calling fax
message, but can machine may have timed out. Try shortening your outgoing
record voice message. message to less than 15 seconds, or ask the calling party to
program your telephone number in their fax machine with 3
pauses and a "#" at the end. (
PAUSE #)
Cause / Action
twice on their touch-tone
Ex:
5551212 PAUSE PAUSE
page
--
--
--
--
--
--