Dialing Re-Enter Function - Panasonic UF-4500 Operating Instructions Manual

Dialing Re-enter Function

If the address is designated with direct dialing, the re-enter screen of the address is displayed. With this
function, transmission is only started if the addresses for the first and second time agree with each other.
This function operates if setting "137 RE-ENTER D. DIAL" of Fax Parameter set to "VALID".
(See page 42)
1
Enter the telephone number.
Ex:
5 5 5 3 4 5 6
2
3
Re-enter the same telephone number and press
If the telephone number is incorrect, repeat the steps,
starting with the first step of inputting the telephone
number.
If the telephone number is correct, transmission is started.
If the telephone number is incorrect, the message "STN MISMATCH" will appear. In this case, start with the
first step of inputting the telephone number.
1. When dial from an external telephone, the re-enter screen is not available.
NOTE
2. If setting "136 RESTRICT D. DIAL" of Fax Parameter set to "VALID", even if you set to "VALID"
with this function, the re-enter screen of the address is not displayed.
Sending Documents
TEL. NO.
555 3456
RE-ENTER TEL. NO
.
Set
55