Table of Contents
Advertisement
Setting the parameters for the LAN Interface
Depending on how the DX-2000 will be configured to communicate on the LAN, the appropriate parameters listed
in the table below must be stored first. (See pages 14 to 18)
Parameter
1
DATE & TIME
2
LOGO
3
CHARACTER ID
4
ID NO.
5
MAC ADDRESS
6*
IP ADDRESS
7*
SUBNET MASK
8*
SMTP SERVER NAME
8*
SMTP SERVER IP ADDR
9*
DEF. ROUTER IP ADDR
10*
EMAIL ADDRESS
11*
DNS SERVER IP ADDRESS
12*
POP SERVER NAME
12*
POP SERVER IP ADDR
13*
POP USER NAME
14*
POP PASSWORD
15*
HOST NAME
16
DEFAULT SUBJECT
17
DEFAULT DOMAIN
18
REMOTE PASSWORD
19
RELAY XMT PASSWORD
20
MANAGER'S EMAIL ADDR
21
DOMAIN NAME (01)
22
DOMAIN NAME (02)
23
DOMAIN NAME (03)
24
DOMAIN NAME (04)
25
DOMAIN NAME (05)
26
DOMAIN NAME (06)
27
DOMAIN NAME (07)
28
DOMAIN NAME (08)
29
DOMAIN NAME (09)
30
DOMAIN NAME (10)
Setting the Internet Parameters
Comments
Current Date and Time. (See page 36)
Up to 25 characters & digits. (See page 38)
Up to 16 characters & digits. (See page 39)
Your Fax Telephone Number. (Up to 20 digits, see page 40)
Hardware Address hard-coded into the DX-2000. (If required, can be obtained
from the 2nd page of the Fax Parameter List printout, by pressing
[FUNCTION][6][4][SET])
IP Address assigned to your DX-2000.
Subnet Mask assigned by the Network Administrator.
The name of the SMTP Mail Server. (Up to 60 characters)
IP Address of the SMTP Mail Server.
IP Address of your Default Router.
The Email Address assigned to your DX-2000 for sending and receiving. (Up
to 60 characters)
IP Address of the DNS Server.
Name of the POP Mail Server.
IP Address of the POP Mail Server.
User Name assigned to your DX-2000. (Up to 40 characters)
Password assigned to your DX-2000. (Up to 10 characters)
The Host Name assigned to your DX-2000. (Up to 60 characters)
The default information to be added to the Subject Line for all outgoing email
(up to 40 characters). To manually input this information before transmission,
change the Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50 characters)
This is a security password that allows Remote Programming of the Internet
Parameters and the Auto Dialer and the retrieval of the Journal via an Email.
(Up to 10 characters)
A password that provides Network security for your Relay Station (used
exclusively for G3 relay purposes). (Up to 10 characters)
Department Manager's Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
Enter the Domain Name(s) that have been authorized to access your Internet
Fax for Relayed XMT Request. (Up to 30 characters)
2
41
Advertisement
Table of Contents
