Changing The Start Time Or The Station Of A File - Panasonic UF-4500 Operating Instructions Manual

Edit File Mode

Changing the Start Time or the Station of a File

To change the start time and/or stations in a communication file, follow the steps below.
1
2
3
4
5
6
7
8
NOTE
88
9
2
Enter the file number or use
that you want to change.
Ex:
0 0 1
(See Note 2)
Enter a new start time.
Ex: (6:00 a.m.)
0 6 0 0
(If you do not have to change the time, skip to step 6.)
To delete the station(s), press
station you want to delete appears. Then press
or
Enter the station(s) you want to add.
1. Your machine cannot change the start time and/or stations in the file while stored document is
being sent or the machine is waiting to redial.
2. If the file is not a Deferred Communication File, the following message is shown in the display.
SET DEF. COMM.?
1:YES 2:NO
Press to change the type of the file for deferred communication file.
1
or to select the file
or key until the
.
Clear
EDIT FILE (1-6)
∨∧
ENTER NO. OR
∨∧
ENTER NO. OR
FILE NO.=
∨∧
ENTER NO. OR
FILE NO.=001
DEFERRED XMT
START TIME 22:30
DEFERRED XMT
START TIME 06:00
<01>(STN name)
5551234
ENTER STATION(S)
THEN PRESS START
1 STN(S) SET
ADD MORE, START
* STORE * NO.005