Panasonic UF-4500 Operating Instructions Manual page 172

Troubleshooting
Information Codes
Info.
Code
722 Failed to obtain the Network Parameters (Such as: IP
Address, Subnet Mask, Default Gateway IP Address,
etc.) from the DHCP server.
731 The dialer buffer for manual dialing was full (10
stations) when the PC-FAX Request was received.
741 Dialing was not successful due to missing of the
telephone number. Occurs when deleting the
telephone number of reserved One-Touch/
Abbreviated dialing numbers with program keys.
800/816 Unit was requested to relay a document or
825 Confidential Communication but has no capability.
815 Mailbox is full.
870 Memory overflow occurred while storing documents
into memory for transmission.
NOTE
172
Meaning
1. After identifying the problem and verifying the recommended action, if the information Codes
keep reoccurring or if you need help on Information Codes that appear on your machine but
are not listed above, please contact the Panasonic Technical Support Hotline.
Action
1. Check the LAN Cable connection.
2. Contact your Network Administrator and
verify whether the DHCP is available on
your network. If it is not, change the Fax
Parameter No. 169 (DHCP CLIENT) to
"INVALID" and set the other Network
Parameters manually (See page 138).
Request the originator to re-send the PC-FAX
Request after the reserved communication is
finished.
Check the telephone number.
Check with the other party.
Install Optional Flash Memory Card.
Transmit documents without storing into
memory.
page
--
--
--
--
--
57