User Parameters; General Description; Setting The Date And Time - Panasonic UF-4500 Operating Instructions Manual

User Parameters

General Description

Your facsimile machine has several basic settings (User Parameters) to help you keep records of the
documents you send or receive. For example, the built-in clock keeps the current date and time, and your
LOGO and ID number help to identify you when you send or receive documents.

Setting the Date and Time

At standby the display will show the date and time. Once the standby display is set, it will automatically be updated.
1
2
3
4
5
6
7
NOTE
26
7
1
Enter the Key Operator Password.
Enter the new date and time.
Ex: Month: August
0 8
Date: 12th
1 2
Year: 2011
2 0 1 1
Time: 3:00 PM
1 5 0 0
If you made a mistake, use
the incorrect number, then overwrite it with the correct one.
1. The clock may occasionally require adjustment. (Lunar inequality : ±1 minute)
2. The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. (Set the
Daylight Time according to your local regulation.)
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT
TIME) to "OFF" . (See page 39)
3. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this Operating Instructions)
or to move the cursor over
SET MODE (1-8)
∨∧
ENTER NO. OR
USER PARAMETERS?
PRESS SET
KEY OPERATOR ID
ENTER ID=
KEY OPERATOR ID
ENTER ID=******
DATE & TIME
1-01-2011 00:00
DATE & TIME
8-12-2011 15:00