Setting The User Parameters For The Lan Interface - Panasonic DX-800 Fax Manual

Setting the User Parameters for the LAN Interface

Depending on how your machine will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first. (See pages 16 to 20)
Parameter
1 DATE & TIME
2 TIME ZONE
3 LOGO
4 CHARACTER ID
5 ID NO.
6 (MAC ADDRESS)
7* IP ADDRESS
8* SUBNET MASK
9* DEFAULT GATEWAY IP
ADDR
10* PRIMARY DNS SERVER
IP ADDRESS
11* SECONDARY DNS
SERVER IP ADDRESS
12* EMAIL ADDRESS
13* SMTP SERVER NAME
14 SMTP SERVER IP ADDR
15* SMTP AUTH NAME
16* SMTP PASSWORD
17* POP SERVER NAME
18* POP SERVER IP ADDR
19* POP USER NAME
20 POP PASSWORD
21 LDAP SERVER NAME
22 LDAP LOG IN NAME
23 LDAP PASSWORD
24 LDAP SEARCH BASE
25 HOST NAME
26 DEFAULT SUBJECT
27 DEFAULT DOMAIN
28 SELECTABLE DOMAINS
(01) ~ (10)
29 REMOTE PASSWORD
30 RELAY XMT PASSWORD A password that provides Network security for your Relay Station (used exclusively for
31 MANAGER'S EMAIL
ADDR
32 RELAY DOMAIN
(01) ~ (10)
33 COMMUNITY NAME
(01) ~ (02)
34 DEVICE NAME
35 DEVICE LOCATION
* Contact your Network Administrator for this Information.
Setting the Internet Parameters
Current Date and Time.
The Time Zone is required as part of the Email header information when sending
Internet faxes.
Up to 25 characters & digits.
Up to 16 characters & digits.
Your Fax Telephone Number. (Up to 20 digits)
Hardware Address hard-coded into your machine. (If required, can be obtained from
the Fax Parameter List printout, by pressing [FUNCTION] [6] [4] [SET])
IP Address assigned to your machine by the Network Administrator or the DHCP
Server.
Subnet Mask assigned by the Network Administrator or the DHCP Server.
Default Gateway IP Address assigned by the Network Administrator or the DHCP
Server.
IP Address of the primary DNS Server. If the DNS Server is not available, change the
setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter the IP
Address instead.
IP Address of the secondary DNS Server.
The Email Address assigned to your machine for sending and receiving. (Up to 60
characters)
The name of the SMTP Mail Server. (Up to 60 characters)
IP Address of the SMTP Mail Server.
User name required to login to the SMTP Server before it allow to send email
messages. (Up to 40 characters).
Password assigned to your machine. (Up to 10 characters)
The name of the POP Mail Server. (Up to 60 characters).
IP Address of the POP Mail Server.
User Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
The name of the LDAP Server. (Up to 60 characters)
Login Name assigned to your machine. (Up to 40 characters)
Password assigned to your machine. (Up to 10 characters)
ID for starting the search in the directory on the LDAP server. (Up to 60 Characters)
The Host Name assigned to your machine. (Up to 60 characters)
The default information to be added to the Subject Line for all outgoing Email (up to 40
characters). To manually input this information before transmission, change the Fax
Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
When the outgoing email address is incomplete by SMTP standards, the Frequently
Sent Domain specified here will be automatically added to the email address. This
feature is also useful as a shortcut when manually entering email addresses to a
frequently used Domain. (Up to 50 characters)
Enter up to 10 Domain Names that can be selected after the Domain "@" key is
pressed using the "\/ or /\" key during Manual email addressing. (Up to 30 characters)
This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to 10
characters)
G3 relay purposes). (Up to 10 characters)
Department Manager's Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax
for Relayed XMT Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in your machine.
Community Name used for the Network Device Locator.
Device Name used for the Network Device Locator.
Device Location for the Network Device Locator.
Comments
49