Sending Documents
Memory Transmission
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
1
2
3
NOTE
50
Set document(s) face up.
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more than one destination.
Ex:
5 5 5 1 2 3 4
The document is stored into memory with a file number.
It then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to be stored into memory.
1. If you need a special access number to get an outside line, dial it first then press
Redial/Pause
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
(represented by a"/"). The dialing method will be changed from Pulse to Tone after
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. This feature is called "Quick Memory Transmission". If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to "INVALID". (See page 41)
to enter a pause (represented by a "-") before dialing the full number.
ENTER STATION(S)
THEN PRESS START
TEL. NO.
5551234
* STORE * NO.002
PAGES=001
05%
* DIALING *
5551234